Problem with a late pan/early body is the rear body mount is too high on the pan - time for some mods to the body.
Viewed: 748 times.
|
Step 1 is to cut off the rear body mount as close to body as possible (make cuts straight and neat)
Viewed: 745 times.
|
Tidy up the cuts - this is what is looked like.
Viewed: 718 times.
|
Had to grind the corner off the shock tower so it didn't foul the body. Had to "tap" the body a little too.
Viewed: 689 times.
|
Some 'OEM' spacers were used to locate the mount in the correct position (had body to pan seal in place) - spacers were a little thinner than the rubber pad.
Viewed: 795 times.
|
