Swingaxle at full droop
Viewed: 2037 times.
|
IRS Clip. These needed additional grinding to fit. I believe they sold me the wrong ones.
Viewed: 1893 times.
|
Approximate cut away area
Viewed: 2689 times.
|
Left side cut away. The clip needs to fit just inside the housing
Viewed: 2720 times.
|
Clip placement jig. I used another IRS pan to create this.
Viewed: 3001 times.
|
Trailing arm mounted. Notice the battery box had to be cut away in order to weld in the clip. I didn't want to remove the body.
Viewed: 2921 times.
|
Both sides welded in place
Viewed: 2714 times.
|
Gusset Template
Viewed: 2866 times.
|
.37" gusset in place. The lower portion of the shock to be cut away for additional upward clearance.
Viewed: 2700 times.
|
Torsion tensioner. Crude, but effective.
Viewed: 2788 times.
|
The results were a wider stance and much better cornering ability. The torsion rods need more adjustment before the motor goes back in.
Viewed: 2621 times.
|
IRS Transmission in.
Viewed: 2700 times.
|
Right side jig
Viewed: 2822 times.
|
right and left jigs
Viewed: 2357 times.
|
Both fitting jigs in place
Viewed: 3390 times.
|
